You’ve asked around. You’ve looked online. You think you found your home renovation contractor. But not so fast. Before you sign on the dotted line, ask to see a project your potential remodeler has already completed. Remember that pictures only show so much. Getting into the space and examining it with your own eyes—and hands—can help ensure that the quality is on par with what you expect. Here are a few things to look for, according to Houzz.com.
A. Tile
A good tile installation is one in which all the tiles are square (meaning they all butt up to each other at 90 degree angles), level and installed so that there aren’t any tiles jutting out or caving in. The grout lines also should be level, evenly sized throughout and as thin as possible. Some designers like to pick funky-shaped tiles or install them in funky ways. But a good rule of thumb is that the tiles should look smooth and evenly placed, and the grout should be skinny.
B. Paint
When observing the quality of a paint job, walk up to the area in question, close your eyes and feel it. Do you feel any rough patches, drip marks or overall inconsistencies? If the answer is yes, then it isn’t a high-quality paint job. Other markers of a decent paint job include clean cut-ins at the ceiling (no wobbly lines between the wall color and the ceiling color) and an even finish throughout (for example, if the walls are supposed to be matte, they should look matte everywhere).
C. Trim
A quality trim installation is similar to a quality tile installation in the sense that it is very geometrical and straight. Look up at the crown molding; are the corners mitered together seamlessly? Check out the casing around the doors and windows; are they level, and do they have neat corners? The answers to both of these questions should be yes. In addition, you shouldn’t be able to see any nail holes in the trim or any obvious seams. This means the trim carpenter filled in the nail holes with putty and took to heart the phrase “measure twice, cut once.”
D. Doors and Cabinets
When you’re invited into someone else’s home, it’s hard to check the quality of doors and cabi-nets without getting too personal and gawking at all their stuff. However, a good, quick test for doors and cabinets is to open and close a few of them to ensure they move smoothly without sticking. Side note: if a house’s foundation moves and there has just been a period of excessive rain or drought, it’s likely that doors may stick because of extraneous conditions, not because of the contractor’s level of craftsmanship.
E. Countertops
Countertops with weirdly placed seams or big gaps that have been filled with caulk are a sign that the original templating of the tops wasn’t done well. You remember that whole “measure twice, cut once” thing? If you see odd seams or gaps, the countertop fabricators probably didn’t follow that rule.
F. Lighting
Look up and see if all the can lights are in line and evenly spaced. Ensure that there aren’t any flickering or flashing lights. While this could be because a lightbulb is getting old, it also could mean that there’s something faulty in the light fixture’s wiring. Also, double check to make sure dimmers are functional. A common mistake I’ve seen, specifically with the introduction of LED lights, is that the LED bulb and the dimmer aren’t paired correctly—causing lights that should dim to flicker, act funny or not dim at all.
